LCP-Siri S12 (with Vectran™) COVERED

LCP-Siri S12 DB (with Vectran™) are high-performance LCP ropes that have been developed for demanding applications and offer the unique characteristics of Vectran® fibers: Minimum Creep, endurance to high temperatures and superb abrasion resistance

APPLICATIONS: MOORING / TOW LINES / STS OPERATIONS (to be used with synthetic tails) / ANCHORING / OFFSHORE / YACHTING

LCP-Siri S12 DB (with Vectran™) Ropes consist of a 12 strand High Modulus Vectran® core over-braided with a highly abrasion resistant polyester jacket.

LCP Siri S12 DB with Vectran

The use of the special NikaThane-J coating application on the Vectran® fibers and the superior in-house Linear Structural Preformation (LSP) process provides a high quality robust rope construction with higher strength efficiency and excellent abrasion resistance. The jacket protects the High Modulus load bearing core against abrasion and UV/environmental degradation and thus prolongs its service life.

Additionally, LCP-Siri S12 DB (with Vectran™) ropes are also available with the special application of Prisma® Shield Technology (under the brand of VectranPrisma-Siri® S-12 DB)

vessel 7

LCP-Siri S12 DB (with Vectran™) ropes are an excellent wire-rope and HMPE alternative and offer several benefits:

  • Most cost-effective ropes to purchase due to lower labor requirements in operations and decreased mooring & towing operating times (compared to wire ropes)
  • High strength-to-size ratio, allowing for lighter weight ropes that are easier to handle (compared to wire ropes).
  • Minimum creep
  • Highly heat resistant
  • 2-3 times longer service life (compared to wire ropes)

LCP-Siri S12 DB (with Vectran™) ropes are produced according to the latest international standards and they comply with OCIMF’s latest regulations & recommendations for the safe mooring of the tanker-LNG-LPG vessels.

Technical Specifications

  • Specific Gravity: 1.40
  • Elongation at breaking: 3.5% (when new)
  • Melting point: Vectran® 330oC / PES 265 oC
  • Chemical Resistance to ALKALI: Very Good (<30% conc.)
  • Chemical Resistance to ORGANIC SOLVENT: Very Good
  • Chemical Resistance to ACID: Very good (<90% conc.)

Technical Datasheet

Size (Circ) Size (Diam) Weight (+/- 5%) Minimum Breaking Load
inches mm Kilos /100m Kilos /220m Tons
2 16 21.8 47.9 19
2 1/4 18 28.9 63.6 27.4
2 1/2 20 33.8 74.4 31.2
2 3/4 22 41.5 91.3 39.4
3 24 48.5 106.7 46.5
3 1/4 26 59.2 130.2 56.8
3 1/2 28 67.6 148 63.8
3 3/4 30 76 167.2 70.8
4 32 88.6 194.9 84.5
4 1/4 34 98.9 217.6 91.8
4 1/2 36 108.5 238.7 103.6
4 3/4 38 122 268.4 114.5
5 40 133.5 293.7 125
5 1/4 42 144.5 317.9 136.5
5 1/2 44 156.3 343.9 150
5 3/4 46 172.2 378.8 163.9
6 48 186 409.2 176.8
6 1/2 52 217.4 478.2 202.5

 

立即购买
Facebook Youtube Linkedin Instagram Twitter
联系我们
© Katradis Group. 版权所有