HYPERFLEX C - 35(W)xK7 Compacted

advanced divider

Fully compacted • 16 outer strands • 1960 Grade

The 35(W)xK7 Compacted wire rope belongs in the multi strand, rotation resistant classification but its strands are compacted and is used as hoisting wire rope.

It is very flexible, 3-layer construction and is suitable for use on European crane brands. Most common lay is the Lang’s lay, for multi layer spooling on the winch drum. 2160 tensile strength is also available upon request. 

These ropes are usually produced as drawn galvanized and internally & externally lubricated, which makes them corrosion resistant and endurable against the various harsh marine environment factors.

Optionally, these ropes are inner plastified for additional protection against corrosion as the inner core is kept greased and is unaffected by the environmental factors that degrade the rope and reduce its useful service life. Inner plastification adds to safety standards as inspection is very difficult for the inner part of the rope, improves the fatigue life, shows greater resistance to drum crushing, is more abrasion resistant and shows reduced interstrand nicking.

Diligent production processes, raw material selection and quality control in all stages of production ensure a long and trouble free service life.

Attention must be paid on the installation of the new rope on board, its running-in (bedding in) period and load and the inspection before and after every usage.

Compacting technology reduces the size and increases the breaking strength. Please read more on advantages of compacted wire ropes.

Technical Data

Nominal diameterApprox. weightMinimum breaking load 1960N/mm²
mmKg/mkN
100.5091
120.74133
130.86155
141.00180
151.15215
161.30244
181.70309
191.85345
202.10375
212.25414
222.50450
232.77490
242.95530
253.15590
263.50620
273.75670
284.08720
294.30775
304.65830
325.55940
345.951050
366.701180
387.081250
407.851380