Serving the Marine Industry since 1936

Wire Ropes for Crane Hoists

4xK36WS Fiber Core Compacted Wire Rope

4x36 Compacted FC Wire Rope

Rotation resistant hoisting wire rope.
High breaking strength with compacted strands.
Excellent resistant to abrasion and crushing on multi layer drum spooling.
Easier for handling, installation.
For tough / harsh working conditions.
Note : Use of swivel is not recommended for these 4 stranded ropes

Applications:

Applications which demand a tough rope and at the same time rotation resistant characteristics.
EOT cranes with high lifting height.
Bulk ship unloader cranes with grabs.
Heavy duty construction equipments like pile drivers.
Special ropes for suspended platform hoists, pulling winches and mobile crane hoists.

Read more

19X7 Wire Rope

19X7 Wire Rope The very basic rotation resistant wire rope, extensively used as hoisting rope for various cranes (provision cranes, hose cranes etc). Also used as life-boat falls.

Less flexible compared to 35(W)x7 but more abrasion resistant.

Its construction is according to EN 12385 standard.

Class 18x7

Read more

4x39 Fiber Core Wire Rope

4x39 Fiber Core Wire Rope Rotation Resistant • 4 Strand

This is a 4-stranded rotation resistant rope mainly for use on Japanese crane brands.

It is supplied in drawn galvanized finish and fully lubricated for long service life.

Robust construction for many hours of usage on board. Tensile strength is minimum 1960 N/mm2.

FC+4x(FC+9 /15+15) • 4xSeS(39)+FC

Read more

35(W)xK7 Compacted Wire Rope

35(W)xK7 Compacted Wire Rope Fully compacted • 16 outer strands • 1960 Grade

The 35(W)xK7 Compacted wire rope belongs in the multi strand, rotation resistant classification but its strands are compacted and is used as hoisting wire rope.

It is very flexible, 3-layer construction and is suitable for use on European crane brands. Most common lay is the Lang's lay, for multi layer spooling on the winch drum. 2160 tensile strength is also available upon request. 

Read more

35(W)X7 Wire Rope

35(W)X7 Wire Rope This wire rope belongs in the multi strand, rotation resistant classification and is used as hoisting wire rope. It is very flexible, 3-layer construction and is suitable for use on many crane brands installed on board.

35(W)X7 ropes are usually produced as drawn galvanized and internally & externally lubricated, which makes them corrosion resistant and endurable against the various harsh marine environment factors.

Construction according to the EN 12385 standard

Read more